Connectors
P1: DAP2 trace port
iSYSTEM BlueBox supports Infineon DAP debug interface connects to the connector P1. 10-pin 1.27mm connector P1 has the following pinout:
Signal Description |
Signal |
Pin |
Pin |
Signal |
Signal Description |
|---|---|---|---|---|---|
Reference Voltage |
Vref |
1 |
2 |
DAP1 |
DAP Data pin |
Ground |
GND |
3 |
4 |
DAP0 |
DAP clock |
Ground |
GND |
5 |
6 |
DAP2 |
Optional 2nd Data pin |
Not Connected |
NC |
7 |
8 |
USER_IN |
User specific |
Ground |
GND |
9 |
10 |
RESET |
Reset |
10-pin DAP pinout
Signal Direction is described from the BlueBox perspective.
|
Be aware that debug and trace signals from the Emulation adapter superset device are not connected to the target board. They are exposed only to the connectors on the Emulation adapter. |
