winIDEA HelpPower supply
This chapter explains how to correctly power iSYSTEM BlueBox.
|
For powering use only original iSYSTEM accessories, which are delivered together with the BlueBox hardware. If you wish to use a power supply different from the delivered one, consult with iSYSTEM first. |
Connecting the Power supply cable
The required power supply is delivered with the BlueBox. A round 3-pin power connector is located on the rear of the BlueBox base unit.
|
Double-check that the BlueBox power switch is OFF. |
|
Connect the power supply cable. |
It is important to push in (pull out for disconnect) the power supply connector plastic sleeve carefully into the BlueBox as it features a locking mechanism.
|
The socket and plug are latching to the plug from being accidentally pulled out of the socket. To remove the power plug from the socket, always pull gently off the sleeve of the plug and never on the wire. |
